Brink® Mist Eliminators for Ammonium Nitrate Prill Towers
Brink® Mist Eliminators for Ammonium Nitrate Prill Towers
Designing fiber bed mist eliminator systems for AN prill towers requires an acute knowledge of salts formation and the effects they have on the efficiency and operation of the system and plant. With tightening regulation governing particulate emissions at the stack, mist eliminators must balance emissions control with pressure drop, service life and capital costs in order to fulfil their target requirements.
Brink® Mist Eliminators for AN Prill Towers
To wash the AN salts and control their formation on and in the fiber beds, an irrigation system is a must. However, particle size distribution in ammonium nitrate solids presents mist eliminators with a challenge. Impaction devices are frequently unable to remove sub-micron sized mist produced in upset conditions. To get around this issue, we have designed and successfully deployed irrigation systems that use spray wetted mesh pads for pre-filtration and humidification. Additional element throat sprays are also used for effective fiber bed irrigation and wash down. This AN prill “scrubber” arrangement has resulted in very high efficiency, zero opacity and long fiber bed life. The heart of this AN prill tower “scrubber” system is the Brink® Fiber Bed Mist Eliminator which employs three special design features for AN service.
• Polyester and/or high temperature polymeric fiber for long life.
• Rigorous quality controlled angle wrap roving fiber or bulk pack for customized
performance and pressure drop characteristics.
• Bi-component fiber beds for fast drainage of captured mist and irrigation
artifacts for highest efficiency.

Brink® mist elimination technology
The Brink® mist elimination technology is used in the chlorine production industry to efficiently remove brine mist from wet chlorine gas and sulfuric acid from dry chlorine gas and of caustic in hydrogen gas.
Brink® is a trusted name in the chlorine industry, with a proven track record for balancing the needs to safeguard equipment, ensure end product quality, and minimize maintenance and operating costs. <o:p></o:p>

over 40 years in ammonium nitrate prill towers
Brink® mist eliminators have been used in ammonium nitrate prill towers for over 40 years to help control soluble particulate emissions at AN plants throughout the world. We have a long history of success with over 20 operating Ammonium Nitrate Emission Abatement Systems worldwide. With the Brink® Fiber Bed Mist Eliminator we can offer a long-term AN prill emissions reduction solution for safe, reliable, and environmentally responsible AN prill tower operation solution that is proven in the field, widely valued by customers around the world, and respected in the industry.
For a comparison of mist elimination options in AN prill operations, read the World Fertilizer July-August 2017 article on AN prill abatement systems.

