Sitetitlecleantechnologies
Search
HamburgerClose
MECS® Sulfur Burning Sulfuric Acid Process Technology

MECS® SULFUR BURNING ACID TECHNOLOGY

 

MECS® sulfuric acid plant technology, engineering, equipment and services set the standard for performance, efficiency, energy recovery, and emissions reduction. We support applications in the fertilizer, non-ferrous metals, refining, power, and coal gasification industries. 

SULFUR BURNING PROCESS DESCRIPTION

 

MECS® sulfur burning sulfuric acid process technology balances the ongoing need of producers in these industries to minimize capital cost while maximizing energy recovery and reducing SO2 emissions. MECS® sulfur burning plants can be designed with several configurations depending on the unique utility cost profile of each fertilizer or nickel producer. 

MECS® technology can also be used to produce sulfuric acid derivatives efficiently and safely, such as several grades of oleum and both gaseous and liquid-phase SO2 and SO3.  And thanks to experience acquired through the design of over 1,000 acid plants worldwide our licensing model offers end-users maximum flexibility to reduce capital cost through the choice of their EPC contractor. 

Expand

In the MECS® sulfur burning process, ambient air is drawn through a high-efficiency MECS® ZeCor® Drying Tower by the main compressor to remove moisture. A MECS® Brink® Mist Eliminator provides efficient acid mist removal, which is critical for the protection of the main compressor. The compressed dry gas enters the sulfur burner, where molten sulfur is burned in the presence of dry air to produce high sulfur dioxide (SO2) gas strength. The hot SO2 combustion gas is then cooled in a steam boiler to the proper temperature for introduction to the converter system. 
 
In the contact section of the plant, the gas flows through three passes of MECS® GEAR™ and Cesium Catalyst, as well as their respective cooling equipment, and is then absorbed with 98% sulfuric acid (H2SO4) in the Interpass absorption tower. The lean SOgas flows through another Brink® Mist Eliminator to remove fine mist particles, protecting downstream equipment. The clean gas is then reheated and enters the converter to complete the fourth conversion pass of SO2 to SO3 using MECS® Super Cesium Catalyst SCX-2000, to achieve the highest possible conversion. The resulting SO3 is absorbed in 98% H2SO4 in the ZeCor® Final Absorbing Tower. Brink® Mist Eliminators are installed in the final tower to ensure the stack gas will meet acid mist environmental regulations. 

Play Play

Heat Recovery Systems - Eurochem Group (Russia)

MECS® provides engineering and equipment that not only lower corrosion and minimize mist generation, but also dramatically increase energy recovery. In fact, our solutions provide paybacks in as little as 3½ years. Our high-efficiency equipment and installations more than triple the amount of recoverable energy compared to traditional systems.

A COMMITMENT TO
INNOVATION AND QUALITY

Our focus and commitment to technology development for efficient emissions reduction are primary drivers for our business. MECS® design and technical service offerings are supported by a team of expert chemical and mechanical engineers, as well as state-of-the-art research and development facilities and staff.

We are focused on continuing to achieve new performance gains, and to solve crucial plant operations bottlenecks. Our expert engineers can custom-design your sulfur burning acid plant to meet your specific application and environmental requirements. Our innovative solutions deliver consistently superior quality, emissions control, energy recovery, and efficiency, using technologies that typically reduce maintenance and lifecycle costs.